Select Page

D2-1 Intelligent Tracking Smart Car Robot DIY Smart Car Kit DIY Electronic Car Suit

Model NO. FUT5044 Origin Chnina HS Code 8528511000

Product Description

D2-1 Intelligent Tracking Smart Car Robot DIY smart car kit diy electronic car suit

Product Description

For learning about the basic knowledge of DIY soldering project, DC motor, mechanical, electronic science, sensor principle, automatic control and so forth.

Description:

competitions, you can have a lot of fun and learning putting this kit together and understanding the theory behind the way the Light Dependent Resistors detect the difference between the black of the line and the white of the area outside the line, if you’re helping a youngster put this kit together you can instruct them in reading the resistor codes or using a multimeter to identify the ratings of the resistors so placement on the PCB is correct.

(1) Install circuit:Install metal film resistor, DIP-8P IC socket, Self-Locking switch, Potentiometer, S8550, Capacitor, Red LED on PCB according to mark on PCB.Install Mecanum wheel, the support bolts of the caster are inserted into the hole, tighten the nuts screwed into the caster, and finally fit the caster and tighten.Install photoresistance resistance and white LED on PCB reverse.Install battery case.Testing: Use 2pcs AA batteries; Press on switch. If 2pcs white LED ON, the installation is successful. If LED off, please check the welding.

(2) Install mechanical parts:Install the four gaskets on the circuit board.Insert a steel shaft from the center hole of the wheel, and note that the direction is inserted from one side of the raised sleeve of the wheel. It is better to insert the steel shaft parallel to the smooth side of the wheel.Put a three-way sleeve into the steel shaft, close to the wheel, and then a gasket into the steel shaft, close to the three-way sleeve, installed in place, toggle three-way sleeve, should be flexible.Place a gear into the steel shaft in the center of the steel shaft.Put a three-axis sleeve into the end of the steel shaft so that the car side of the wheel assembly to complete.Install motor.Testing: Power on. Check S8550 or 10ohm resistor if motor don’t move; Install LM393.

After-sales Service1,Shipping Warranty:We usually ship goods By DHL, UPS, EMS, Singpost airmail, and HongKong Airmail.DHL: 3-5 daysUPS: 5-7 daysEMS: 10-15 working daysChinapost/HongKong Airmail: 7- 25 working days. At most 45 days.If you have not received the goods during the normal time, please contact us for checkingthepackage statustimely online or by email.2,Product replacement and warranty Ifyou have any prodcut quality problem, you can send it back to us with the original condition,we will repair or exchange new one for you. If you have any using problem of the products which buy from FUT, please feedback to us first, and we will discuss the issue with you. Via our technical support, we can dig out your using problem via our technical support in most of cases. Lost Products: If products get lost in delivery, or you still do not get your item for a long time, please contact our customer service timely. We will deal with this ASAP. Please do not deal with it all by yourself, we want you communicate with us. Usually, we will provide tracking number and tracking link timely. If products get lost on the way and we get confirm from couriers, we will arrange redelivery for your products. If you want ship it through express, then you need to pay express shipping fee. 3,Technical Service:. If you have technical problem with the product you received from us, please contact us online or by email: Contact usRemote help service: If your problem needs to be solved by remote help by our engineer, please download the teamviewer software, install it on your computer, then give us ID and password for remote help.

Basic Info.

Model NO. FUT5044 Origin Chnina HS Code 8528511000

Product Description

Customer Question & Answer Ask something for more details (0)

D2-1 Intelligent Tracking Smart Car Robot DIY smart car kit diy electronic car suit

Product Description

For learning about the basic knowledge of DIY soldering project, DC motor, mechanical, electronic science, sensor principle, automatic control and so forth.

Description:

competitions, you can have a lot of fun and learning putting this kit together and understanding the theory behind the way the Light Dependent Resistors detect the difference between the black of the line and the white of the area outside the line, if you’re helping a youngster put this kit together you can instruct them in reading the resistor codes or using a multimeter to identify the ratings of the resistors so placement on the PCB is correct.

(1) Install circuit:Install metal film resistor, DIP-8P IC socket, Self-Locking switch, Potentiometer, S8550, Capacitor, Red LED on PCB according to mark on PCB.Install Mecanum wheel, the support bolts of the caster are inserted into the hole, tighten the nuts screwed into the caster, and finally fit the caster and tighten.Install photoresistance resistance and white LED on PCB reverse.Install battery case.Testing: Use 2pcs AA batteries; Press on switch. If 2pcs white LED ON, the installation is successful. If LED off, please check the welding.

(2) Install mechanical parts:Install the four gaskets on the circuit board.Insert a steel shaft from the center hole of the wheel, and note that the direction is inserted from one side of the raised sleeve of the wheel. It is better to insert the steel shaft parallel to the smooth side of the wheel.Put a three-way sleeve into the steel shaft, close to the wheel, and then a gasket into the steel shaft, close to the three-way sleeve, installed in place, toggle three-way sleeve, should be flexible.Place a gear into the steel shaft in the center of the steel shaft.Put a three-axis sleeve into the end of the steel shaft so that the car side of the wheel assembly to complete.Install motor.Testing: Power on. Check S8550 or 10ohm resistor if motor don’t move; Install LM393.

After-sales Service1,Shipping Warranty:We usually ship goods By DHL, UPS, EMS, Singpost airmail, and HongKong Airmail.DHL: 3-5 daysUPS: 5-7 daysEMS: 10-15 working daysChinapost/HongKong Airmail: 7- 25 working days. At most 45 days.If you have not received the goods during the normal time, please contact us for checkingthepackage statustimely online or by email.2,Product replacement and warranty Ifyou have any prodcut quality problem, you can send it back to us with the original condition,we will repair or exchange new one for you. If you have any using problem of the products which buy from FUT, please feedback to us first, and we will discuss the issue with you. Via our technical support, we can dig out your using problem via our technical support in most of cases. Lost Products: If products get lost in delivery, or you still do not get your item for a long time, please contact our customer service timely. We will deal with this ASAP. Please do not deal with it all by yourself, we want you communicate with us. Usually, we will provide tracking number and tracking link timely. If products get lost on the way and we get confirm from couriers, we will arrange redelivery for your products. If you want ship it through express, then you need to pay express shipping fee. 3,Technical Service:. If you have technical problem with the product you received from us, please contact us online or by email: Contact usRemote help service: If your problem needs to be solved by remote help by our engineer, please download the teamviewer software, install it on your computer, then give us ID and password for remote help.

shaft car

As one of leading shaft car manufacturers, suppliers and exporters of products, We offer shaft car and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of shaft car

Recent Posts